Our Product Engineering Services helps in the complete product development, which start from the requirements gathering to Product deliver and supporting.

Define product requirements

Developing the product requirements specification for the individual product and reuse the requirements from the preceding phase.

Design product

All activities for producing the product architecture, Makes use of the reference architecture from the step “Design Domain”, it selects and configures the required parts of the reference architecture and incorporates product specific adaptations.

Build product

During this process the product is built, using selections and configurations of the reusable components.

Test product

During this step the product is verified and validated against its specifications. A test report gives information about all tests that were carried out, this gives an overview of possible errors in the product. If the product in the next step is not accepted, the process will loop back to “Build Product”, in Figure 1 this is indicated as “[unsatisfied]”.

Deliver and Support Product

The final step is the acceptance of the final product. If it has been successfully tested and approved to be complete, it can be delivered. If the product does not satisfy to the specifications, it has to be rebuilt and tested again.

The next figure shows the overall process of product family/line engineering as described above. It is a full process overview with all concepts attached to the different steps.